Elnur Gabarron G CONTROL HUB, Инструкция по установке и руководство пользователя

Страница: 10 / 16

9
EN
Automatic detection will be aborted after several seconds if you are not connected to the same
network that the G Control Hub device or if the connection has failed. A new menu will appear
where the user can introduce the Device ID Code, 18 position alphanumeric code, located on the
label on the bottom of the device to link manually the register account with the G Control Hub.
Once the link between your user account and the G Control Hub is established, the different devices
associated with the G Control Hub can be controlled remotely using Elnur Wifi Control app or the
website
https://remotecontrol.elnur.es.
2.4. Heating devices association
It is required to link by radiofrequency the different devices with the G Control Hub to control them
remotely trough the website and mobile app.
Warning G Control Hub is only compatible with devices equipped with G Control system.
Discovery mode.
The first step to associate the different devices with the G Control Hub is to activate the discovery
mode of the hub. The discovery mode can be activated in two ways:
- Locally in the hub.
To activate the discovery mode locally in the hub, press the button located on the back side of the
device for 3 seconds, LED lights indicating discovery mode, orange light blinking every second,
should be activated.
-
Using app o app-web.
Having the user account linked to the hub, from the main menu in the app, press “Install” button
and follow the instructions of the installation wizard, G Control Hub will activate the discovery
mode.
Once activated discovery mode, you have 1 minute to add a new device, the account time is reset
with each added device.