28
MODEL: eXperience 620
REPLACING DC MOTOR
AND ADJUSTING MOTOR BELT TENSION
TO REMOVE:
1. Remove the belt cover (see page 8).
2. Disconnect the motor connector.
Remove the two setscrews, then remove the DC motor and belt.
TO ATTACH:
3. Set the motor in machine and replace screws.
4. Replace the motor belt.
5. When applying approximately 300 grams pressure in the middle of the belt, it should deflect 7 to 9
mm when set properly.
6. Tighten the setscrews.
7. Attach the belt cover.
Pressure 300g
Belt deflection 7~9 mm
Setscrews (2)
DC motor (unit)
Belt
Motor connector
Содержание eXperience 620
Страница 1: ...SERVICE MANUAL eXperience 620...