ELNA eXperience 560, Инструкция по эксплуатации

Страница: 46 / 72

44
Darning Stitch
q
Stitch pattern: 23
w
Thread tension dial: 3 to 6
e
Presser foot: Automatic buttonhole foot R
q
w
e
r
w
y
u
z x c v
Sewing a shorter darning
To sew a darning shorter than 2 cm (3/4˝), first stop the
machine after sewing the required length
y
, then press
the reverse button
t
.
The required length
y
has been determined.
Start the machine again and continue sewing until the
machine stops automatically.
t
Reverse button
y
Required length
u
Starting point
Sewing a same-sized darning
Simply start the machine to sew another darning at the
same size.
NOTE:
To reset the size of the darning, select the other stitch
pattern and reselect the darning stitch.
Adjusting the evenness of darning
Correct the evenness of the darning as follows:
“d5” is the default setting value.
When the right side of the darn is lower than the left side,
press the “ ” sign on the stitch length adjusting button
q
to set the value to “d6” to “d9”, and make the darn even.
When the left side of the darn is lower than the right side,
press the “ ” sign on the stitch length adjusting button
q
to set the value to “d1” to “d4”, and make the darn even.
q
Stitch length adjusting button
Starting to sew
z
Attach the automatic buttonhole foot R and pull the
button holder
q
all the way out.
Draw the needle thread to the left through the hole of
foot.
q
Button holder
x
Place the fabric under the foot, and lower the needle
at the starting point
w
. Then lower the foot.
w
Starting point
c
Start the machine. The machine will sew locking
stitch, 16 rows of darning, locking stitch again and
stop automatically.
v
Turn the fabric and repeat sewing in different direction.
e
2 cm (3/4˝)
r
0.7 cm (9/32˝)
4
w e q
q
t