background image

59

Select the stitch pattern 51 for French knots.

Tighten the thread tension to 5-8 when sewing.

w

e

q

French Knots

q

 Stitch pattern: 

51

w

 Thread tension dial:  5 to 8

e

 Presser foot:  

Satin stitch foot F

Scallop Stitch

q

 Stitch pattern: 

33

w

 Thread tension dial:   3 to 6

e

 Presser foot:  

Zigzag foot A

* The stitch patterns 43 and 69 can also be used.

4

q

w

e

Sew the stitches approximately 1 cm (3/8˝) inside the 

fabric edge.

Trim the outside of the stitches as shown. Make sure not 

to cut the thread.

Smocking

q

 Stitch pattern:  

60

w

 Thread tension dial:   1 to 4

e

 Presser foot:  

Satin stitch foot F

* The stitch patterns 40, 45 and 46 can also be used.

4

q

w

e

q

w

e

Smocking is a delicate decorative treatment used on 

children’s clothes or women’s blouses.

Use a soft and lightweight fabric such as batiste, gingham 

or challis.

Cut the fabric three times wider than the projected width. 

Select straight stitch, set stitch length at “5.0” and loosen 

the thread tension.

Sew rows of straight stitches 1 cm (3/8˝) apart across the 

area to be smocked. Knot the threads along one edge. 

From the other edge, pull the bobbin threads to distribute 

the gathers evenly.

 

q

 1 cm (3/8˝)

 

w

 Knotted thread

Set the thread tension to 1–4 and select a smocking 

stitch pattern.

Sew the smocking stitch pattern between the rows of 

straight stitches.

Remove the straight stitches by pulling them out.

 

e

  Straight stitch

Содержание eXperience 560









































































Отзывы: