65
4. Passez le fil sous le guide-fil
r
de la droite
vers la gauche.
5. Glissez le fil dans la fente
t
de le couvercle du
levier tendeur du fond.
Soulevez le fil et accrochez-le vers le haut plus
du tiers guide-fil
y
.
6. Abaissez le fil et glissez-le dans l’entaille droite
de la plaque guide-fil
u
.
7. Passez la bande de roulement de la droite au
dos du guide-fil de barre à aiguille
i
.
8. Enfilez l’aiguille gauche
o
de l’avant vers l’arrière
et tirer le fil environ 10 cm (4
˝
) de l’oeil de
l’aiguille au dos sous le pied (référez-vous à la
page suivante pour que la façon enfiler
l’aiguille).
Guide-fil
Fente de le couvercle du levier tendeur
Tiers guide-fil
Plaque guide-fil
Guide-fil de barre à aiguille
Aiguille gauche
4. Führen Sie den Faden unter die Fadenführung
r
von rechts nach links.
5. Führen Sie den Faden durch den Schlitz
t
von
unten nach oben.
Ziehen Sie den Faden hoch und führen ihn oben
über die Fadenführung
y
.
6. Führen Sie den Faden wieder nach unten durch
die linke Öffnung der Führungsplatte
u
.
7. Führen Sie den Faden auf die Rückseite
der Nadelhalterung
i
.
8. Fädeln Sie den Faden durch das linke Nadelöhr
o
. Ziehen Sie den Faden ungefähr 10 cm (4
˝
)
zur Rückseite unter den Nähfuß durch.
Gewindeführer
Schlitz der Aufnahmehebelabdeckung
Drittel Gewindeführer
Führerplatte
Nadelstab-Gewindeführer
Linke Nadel
4
5
6
7
8
4
5
6
7
8
9
9