Solo Guitar Installation Guide
Safety Information
MAN-SOLGUIIG (Ver. 1.404)
10
1.3.
Directives and Standards
The Solo Guitar conforms to the following industry safety standards:
Safety Standard
Item
Approved
IEC/EN 61800-5-1, Safety
Adjustable speed electrical power drive systems
Recognized
UL 508C
Power Conversion Equipment
In compliance with
UL 840
Insulation Coordination Including Clearances and
Creepage Distances for Electrical Equipment
In compliance with
UL 60950-1
(formerly
UL 1950
)
Safety of Information Technology Equipment
Including Electrical Business Equipment
In compliance with
EN 60204-1
Low Voltage Directive 73/23/EEC
The Solo Guitar servo drive has been developed, produced, tested and documented in
accordance with the relevant standards. Elmo Motion Control is not responsible for any
deviation from the configuration and installation described in this documentation.
Furthermore, Elmo is not responsible for the performance of new measurements or ensuring
that regulatory requirements are met.
1.4.
CE Marking Conformance
The Solo Guitar servo drive is intended for incorporation in a machine or end product. The
actual end product must comply with all safety aspects of the relevant requirements of the
European Safety of Machinery Directive 98/37/EC as amended, and with those of the most
recent versions of standards
EN 60204-1
and
EN 292-2
at the least.
According to Annex III of Article 13 of Council Directive 93/68/EEC, amending Council Directive
73/23/EEC concerning electrical equipment designed for use within certain voltage limits, the
Solo Guitar meets the provisions outlined in Council Directive 73/23/EEC. The party responsible
for ensuring that the equipment meets the limits required by EMC regulations is the
manufacturer of the end product.
1.5.
Warranty Information
The products covered in this manual are warranted to be free of defects in material and
workmanship and conform to the specifications stated either within this document or in the
product catalog description. All Elmo drives are warranted for a period of 12 months from the
date of shipment. No other warranties, expressed or implied — and including a warranty of
merchantability and fitness for a particular purpose — extend beyond this warranty.