Elmo L-12 ID, Инструкция по эксплуатации

Страница: 70 / 97

62
English
AD
VANCED
OPERA
TIONS
„
Basic operations of the portable IWB
Pen Tip
Button 2
Button 1
A
◆
About the Pen
• Do not cover A with your hand
when holding the pen.
Doing so will hinder detection of information about the pen's
position.
• Write with the pen
perpendicular to the screen
.
Problems occur when the pen is tilted too much.
• If "Pen Tip", "Pen Button 1" or "Pen Button 2" are pressed for 2
minutes and 30 seconds, the power to the pen will automatically
turn off.
You cannot
write continuously for more than 2 minutes and 30
seconds .
• Do not use rechargeable batteries in the pen.
Pen Tip: Left mouse button
Button 1: Right mouse button
Button 2: Middle mouse button (wheel)
●
Recognition of the write range (calibration)
Hold down Button 1 on the pen (three seconds or more) at the center of the portable IWB receiver (within a
2 cm radius).
You are in the Calibration mode when you hear a long beep.
Portal IWB receiver
Button 1
2 cm radius
Button 2
A symbol appears at the top left of the screen (
①
in figure below) when you enter the Calibration mode.
You will hear a short beep when you touch the symbol with the tip of the pen. The symbol appears in the
①
,
②
,
③
, and
④
positions in this order. There will be three short beeps when you touch the last symbol,
which means the calibration is completed.
① ②
③ ④