Preparation to work
•
Unpack the centrifuge.
•
Inspect the appearance of the device, the adapter and the power cord for damage.
•
Open the lid of the centrifuge with the emergency lid opening lever and remove the
packaging material (see emergency opening of the centrifuge lid pg.7).
•
In the cold season keep centrifuge at room temperature for at least 2 hours.
•
Assembly the rotor it must rotate freely without jamming.
•
Connect the centrifuge to the adapter and the adapter to the socket.
•
The light indicators will light up.
•
In the absence of faults or damage the centrifuge can be considered ready to work.
ATTENTION! In the presence of faults and damage, do not use the centrifuge without
consulting a specialist.
ATTENTION! Network socket must correspond to the adapter plug. In case of non
compliance with this condition the rules of electrical safety are violated.
4
Control description
On the front side of the centrifuge the control panel is situated with indicators and buttons that
have the following functions:
Control description
- Increasing parameter / lid opening button.
- Decreasing parameter / starting and stopping button.
- Setting timer.
- Setting braking level.
- Setting speed.
ATTENTION! To change the PRM to G (RCF), or vice versa,
Press and hold button for 5 seconds.