ELMETRON CX-401, Руководство пользователя

Страница: 12 / 120

- 6 -
User‘s manual for CX-401 multifunction meter v6.0x
3. WHAT IS THE METER DESIGNED FOR
CX-401 multifunction meter is a precise and easy-to-use meter designed for
measurements of hydrogen ion concentration in pH units, redox potential
(mV), conductivity of solutions in in S/cm, resistivity in
Ω
cm, concentration of
oxygen dissolved in water in % or mg/l, oxygen saturation in air in % and
atmospheric pressure measurement in hPa. The meter can be also used for
accurate measurements of the temperature of solutions and air in °C.
For measurements in pure and ultra pure water suitable temperature
compensation may be chosen.
The conductivity reading can be displayed in S/cm or in concentration units
(g/l or %) counted to NaCl, KCl or TDS. Waterproof housing enables work in
difficult weather conditions or in humid environment.
CX-401 is used in food, chemical, pharmaceutical and power industries, in
water treatment stations, laboratories, agriculture, universities, scientific
laboratories etc.
The meter is prepared to work with all types of combination pH electrodes and
conductivity cells, with wide K constant range, equipped with the BNC-50
connector. It is possible to connect the meter with two electrodes (pH
measuring and reference) by special adapter offered as an additional
equipment. CX-401 cooperates with Pt-1000 temperature probe with the
Chinch connector.
The meter may store measurement results taken as single or series of
measurements with set time interval. The USB interface enables sending the
stored results. When the collected series exceed the memory capacity, it is
possible to use included software.