ELMETRON CX-401, Руководство пользователя

Страница: 107 / 120

- 101 -
30.4. Reviewing the readings
Reviewing stored readings is started in the measuring mode by pressing and
holding the button until the number of the last stored result displays on
turns with its value.
Every press of the or
button shows the next or the previous
number and the result with time and date depending on which parameter of
the
function has been chosen (description point 30.1.c).
In this mode the ,
buttons function with repetition and after holding
them the numbers are changing with increasing rate till they stop at the
highest or lowest number.
The reviewing mode is left by pressing the
button.
30.5. Deleting stored readings
In order to delete stored readings:
- press and hold the
button;
- with the , buttons set the number from which deleting process is
to be started;
- press and hold the button; it will delete results from the chosen one to
the last one stored. Instead of readings there will be the
symbol
displayed, what confirms deleting;
- to exit the reviewing mode press the button.
In case of filling up the memory capacity, further readings will not be stored.
To store new readings it is necessary to delete the previous ones acting as it
is described above. In case of deleting all the readings from the memory, it
should be started from the first number.