5
Technical Support: +44(0)23 9269 6638 (option 3)
PAK200583_02C Jan 2021 ©2019 ELMDENE INTERNATIONAL LTD
Fit 2 x 12V
7 Ah batteries
WARNING: ALWAYS FIT 2 BATTERIES and wire in series,
the product will not work with a single 12V battery
Fit 2 x 12V
1.2 Ah batteries
Mounting
–
C Box
–
7Ah
5)
The C box is designed to support two 7Ah batteries and as such weighs a total of 8 kg when loaded. Ensure
that wall fixings are appropriate to support this weight.
Mounting
–
T box
–
1.2Ah
6)
The T box is designed to support two support two 1.2Ah batteries, and as such weighs 3.5 kg when loaded.
Ensure that wall fixings are appropriate to support this weight.
7)
The product should be mounted no further than 10 cm from the control and indicating equipment, close
coupled by conduit if it is being used to power the CIE directly.
8)
Fix to wall or other structure in correct orientation i.e. with hinge on left hand side, using screws of
sufficient size and length through the mounting holes.
9)
Protect the battery terminals from any metal surfaces during installation as shorting of the terminals is
hazardous.
10)
Knock-outs are provided in the case for mating with external trunking or conduit.
11)
Ensure that all unused holes (on the rear of the case) are sealed to prevent the ingress of damp and dust.
Figure 1
–
Mounting points
Figure 2
–
Battery location
“C” Enclosure
“T” Enclosure
Mounting
points
