4
Technical Support: +44(0)23 9269 6638 (option 3)
PAK200500_03C Dec 2016 ©2016 ELMDENE INTERNATIONAL LTD
Tamper
19)
Check that the tamper spring makes good contact with box lid when closed. Check that the tamper
switch is:
-
closed when the lid is closed and the lid screw is fitted
-
open when the lid is open.
20)
Close cover and secure using fastening screw(s) provided.
M
ODEL
S
PECIFICATION
T
ABLE
G13801N
G138015N
G13802N
G13803N
G13804N
G13805N
Output Current
1A
1.5A
2A
3A
4A
5A
Battery Charge Current
0.5A
0.5A
0.5A
0.5A
0.5A
0.5A
Mains LED
√
√
√
√
√
√
Fault LED
√
√
√
√
X
X
Max Mains Input
Current
(at 90Vac)
0.8A
1.0A
1.0A
1.2A
1.8A
2.0A
Mains Input Fuse
T2.0A
T2.0A
T2.0A
T2.0A
T3.15A
T3.15A
Output Fuse**
F1.0A
F1.6A
F2.0A
F3.15A
F4.0A
F5.0A
Tamper Rating
0.05A
24Vdc
0.05A
24Vdc
0.05A
24Vdc
0.05A
24Vdc
0.05A
24Vdc
0.05A
24Vdc
** Module Fuse
O
PERATING
I
NSTRUCTIONS
This unit is intended for use by Service Personnel only - There are NO USER SERVICEABLE parts inside.
The green Mains LED will be illuminated whilst the mains supply is present. In the event of a fault condition,
the red Fault LED will be illuminated (dependent on model).
M
AINTENANCE
There is no regular maintenance required of the PSU other than periodic testing and replacement of the
standby battery.
Reference should be made to the battery manufacturer’s documentation to determine
typical/expected battery life with a view to periodic replacement of the battery
.
If the output of the PSU fails the cause of the failure should be investigated e.g. short circuit
load. The fault should be rectified before restoring power to the PSU. The fuses may need to be
replaced. Ensure the correct fuse rating and type is used.
CAUTION
Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the battery manufacturer’s instructions and all local
and national regulations.
The packaging supplied with this product may be recycled. Please dispose of packaging accordingly
.
www.elmdene.co.uk
