10
EN
GLISH
02. INSTRUCTIONS FOR USE.
03. MAINTENANCE AND WARNINGS.
MAINTENANCE
For a long lifespan, the device requires regular
maintenance. Clean the device when it is cool,
using a cloth moistened in soapy water or noon-
abrasive liquid detergents. After cleaning, ensu-
re that the gas outlet openings of the burner are
not obstructed.
ATTENTION
If turning the gas control valve on or off becomes
different or does not work, do not force or repair
it. Request technical assistance immediately.
Regularly review the state of repair of the devi-
ce, and if necessary, visit the official technical
service.
When the device is not being used, keep it in its
bag in a safe, dry place.
MODE OF USE
1.
Remove the tray support and place it in the
correct position, shown on the warning label.
2.
Open the cartridge protection and place
it with the head forward, so that the notch is
upwards, in line with the valve guide (fig. B2).
3.
Push the closing lever down (fig. B2), locking
the cartridge.
4.
Next, turn the knob fully to the left and put it
in the “ ” position until the device turns on. If it
does not turn on, repeat this operation (fig. C1).
5.
Move the knob and adjust the flame to the
desired position.
IMPORTANT AFTER USE
• Turn the knob to the (“OFF”) position (fully to
the right), lift the cartridge lever, unlocking it.
• In case of emergency, the stove can be turned
off immediately by lifting the cartridge lock lever.
• Check that the stove is turned off before remo-
ving the gas cartridge.
• For your own safety, we remind you to always
remove the cartridge after use.
• Once the stove has fully cooled.
1.
Remove the cartridge, put on the safety cover
and keep it in a cool, dry, well ventilated place.
2.
After use, the stove must be cleaned well, eli-
minating all food and fat residue.
3.
Place the drip tray so that both the drip tray
and the supports are face down. Then place the
portable stove in the transport bag included.
4.
Do not modify the device.
CAUTION
Some accessible parts may reach high tempera-
tures: use protective gloves and keep the device
away from children.
FAULT RESOLUTION
Problem
Solution
Gas is not
released
• Check that the gas
cartridge is correctly
installed.
• The gas cartridge is
empty, replace it with a
new one.
It does not turn
on
• Clean the head of the
burner with a brush.
• Check that the piezo
electric component is in a
good state of repair.
