14 Change parameters in Setup
Elma Schmidbauer GmbH
28 / 32
Elmasonic Select
Parameter reference:
The following unit functions can be adjusted. The preset factory values are shown in bold:
Parameter
Unit function
Value
Effect
01
*
Adjustment range for
cleaning duration
> 10 min.
00
/01
Increments of 5 min.
/increments of
1 min. (as for cleaning durations up
to 10 min.).
NOTICE! Saved
programmes will be deleted.
02
Show remaining time
< 1 min. in seconds
00/
01
Off/
on
03
*
Temperature unit
°C
/°F
Display in degrees
Celsius
/
Fahrenheit.
NOTICE! Saved
programmes will be deleted.
04
*
Default temperature limit
00
/40/45/50/55/60
00
/100/110/120/130/
140
Off
/40 °C/45 °C/50 °C/55 °C/60 °C
Off
/100 °F/110 °F/120 °F/130 °F/140 °
F
NOTICE! Saved programmes will
be deleted.
05
Acoustic signal for “End
of cleaning”
00/
01
/02
Off/
melody 1
/melody 2
06
Acoustic signal for “Error
message”
00/
01
/02
Off/
melody 1
/melody 2
07
Acoustic signal for
“Temperature limit
exceeded”
00/
01
/02
Off/
melody 1
/melody 2
08
Response if temperature
limit is exceeded
00/
01
/02/03
No action/
ultrasound off
/heating off/
ultrasound and heating off
09
Display brightness
01/02/
03
/04
Dim/medium/
normal
/bright
10
LED test
00
/01
Off
/all display LEDs on for approx.
5 sec.
20
***
Autostart on restoration
of power supply
00
/11/12/13
Off
/ultrasound on/heating on/
ultrasound and heating on
CAUTION! Risk of damage to the
unit if the unit runs dry.
30
*
Reset unit settings
00
/11
Off
/on: "11" resets all settings to the
factory settings.
NOTICE! Saved
programmes will be deleted.
31
**
Response if dry-run
monitor is triggered
00/
01
No action/
ultrasound and heating
off, display Dry run symbol.
** Not available for unit sizes 500/900.
*** The unit starts up immediately in heating and/or ultrasound operation when plugged in or when the
power supply is switched on.
