Elma Schmidbauer GmbH
Putting into Operations
Cyclomatic Due
5
4
Putting into Operations
Place the unit onto a stable and dry surface
Connect the Cyclomatic Due to a suitable power supply unit or
make sure that it is equipped with charged batteries.
When the unit is ready for operation place one or two watches
on the clamping device. Switch on the required operation mode
at the rocker switch.
Caution:
For the winding of heavy watches always place two
watches on the unit (weight compensation) to prolong the
service life of motor and batteries.
5
Switch positions
There are three switch positions: cycle operation mode,
permanent operation mode and "0ff".
0
Off
Cycle operation mode
∞
Permanent operation mode
5.1
Cycle operation
With this operation mode the watchwork is wound very gently.
We recommend it for operation with batteries if the unit is to be
switched on over a prolonged period, e.g. overnight, in the safe,
etc. (service life of batteries).
•
Put the rocker switch into
___
position (= cycle
operation).
•
The unit alternately switches on and off for a predefined
length of time. (See section 6).
•
The unit changes the sense of rotation with each winding
cycle.
Preparation
