Elma Schmidbauer GmbH
Power supply by power supply unit
Cyclomatic Due
7
8.1
Change of batteries
•
Open the unit:
•
Use a small screw driver (size 3) and put it in the bottom
recesses to gently lever the bottom plate from the housing.
•
Insert 4 alkaline-manganous batteries of the type Baby LR
14 Size C, 1.5 V.
Caution:
Make sure that the batteries are correctly polarized
(see symbols).
•
Close the unit:
•
Position the bottom plate in the grooves on one side of the
housing top.
•
Now use the small screw driver reversely to press the
bottom plate into the housing top. Make sure that the bottom
plate is correctly fixed.
The Cyclomatic Due is now ready for operation.
9
Power supply by power supply unit
For operation by power supply from the mains plug the low
voltage plug of the power supply unit in the connecting jack on
the back of the unit. Inserted batteries are automatically
switched off when the Cyclomatic Due is operated by power
supply unit.
Caution: Always use the original Elma power supply unit to
prevent damage from the electronics of the Cyclomatic Due.
10
Upkeep of the Machine
For your own safety, we recommend that you check the mains
cable and the mains connection jack at the unit for damage at
regular intervals.
In case of technical faults please contact your supplier or the
manufacturer of the unit.
When corresponding in regard to your machine, please give
motor serial number.
Repair and maintenance works must be carried out by
authorized and specialized personnel only.
In case of damage please contact the manufacturer or your
supplier.
Mains cable and
mains connection
Repair
Opening by
authorized personnel
only
DANGER
