Ellison RollModel, Инструкция пользователя

Страница: 11 / 30

11
Number of
Pieces Product
1 Aluminum .016"
1 Balsa Wood 3/32"
1 Basswood
1 Brass .005"
1 Bubble Wrap
6 Butcher Paper
5 Cardstock/Cover Stock
3-4 Cardstock, Laminated
1-2 Chipboard
4-5 Construction Paper
3-4 Construction Paper, Laminated
8 Copier Paper
1 Cork, Self-Adhesive 1/8"
4 Decorator Foil
1 Embossing Rubber
Varies Fabric (Cotton, Linen, etc., as many pieces as will fit
with a piece of paper)
1 Fabric, Iron-On
Varies Felt (as many pieces as will fit with a piece of paper)
1 Felt, Self-Adhesive
1 Fun Foam
3 Funky Film
2 Funky Fur
8 Gift Wrap
1 Leather
1 Magnet, Flexible Sheets
1 Magnet, Self-Adhesive
1 Mat Board
3 PaperWood
1 Personalized Embossing Plastic (PEP)
1 Plastic, Shrink Film
1 Poly Foam
2 Poster Board
As a general rule, RollModel Machine will cut anything that scissors will cut.
The number of pieces of material that it will cut depends on the thickness of the
material to be cut and the size and complexity of the die design. Remember that
dies MUST be placed rubber side up on the Sliding Tray.

When cutting felt, poly foam or delicate materials, place a scrap of paper
over the material to be cut.

It may be necessary to use fewer sheets of material with intricate shapes
(e.g., Snowflake or Spider).
Materials Guide