3
Read all the instructions before using
the appliance. Read and understand
these instructions before using your
RollModel Machine. When using this product, basic precautions
should always be followed, including the following:
Always place and operate this machine on a clean, flat, sturdy, non-skid
surface (stout table or workbench). Do not allow any part of the machine to
overhang the edges of your work area.
The Sliding Tray is very heavy. Use extreme care and caution when handling.
Seek assistance whenever possible.
To reduce the risk of personal injury, close supervision is necessary when the
RollModel is used near children.
Use only attachments and accessories recommended by the manufacturer of
your RollModel die-cutting machine.
Do not use outdoors.
Pinch hazard. Keep hands, fingers and clothing away from contact with
rollers.
Pinch hazard. Avoid placing hand between Tray Stops and end of Machine.
To slide tray, hold top of Tray Stops.
Do not overload the machine. See Materials Guide (pages 11 and 12) and
never exceed the recommended number of pieces of material to be cut.
Cutting hazard. Do not contact the blade of the dies.
Use only Sliding Tray supplied with your RollModel die-cutting machine. Using
another type or brand could cause damage to your machine and dies.
Carry your RollModel die-cutting machine using the molded handholds at
both ends of the machine. Lifting or carrying the machine by any other part
of the machine is unsafe.
Always cut materials with rubber side of dies facing up.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Store in one of the well spaces under the Sliding Tray.
WARNING
