Elliott Roto-Jet 0420, Инструкция по эксплуатации и техническому обслуживанию

Страница: 7 / 27

0420 Roto-Jet
7
OPERATION
Correct Machine Position and Operation is critical to getting the job done quickly and efficiently.
This can be accomplished by the following these steps:
Examine the tubes to be cleaned and measure the internal diameter (Elliott Tube Gauge is
recommended) and length of the tubes. If the tube ends are expanded, then make a note of the
smallest internal diameter. Record these measurements on the chart provided in the back of
this manual. You will need these measurements to select the proper size flexshaft and cleaning
attachments.
Carry the machine to the location where the cleaning will take place.
Position the machine at a right angle to the tube sheet or cleaning area. This will keep the flexshaft
at the proper radius. NEVER OPERATE THE MACHINE IN THE VERTICAL POSITION.
(See Diagram A).
TOOL TIP
Always select a smaller size of cleaning device for heavy
tube deposits. With the exception of the Elliott Turbo Brush,
never use a brush or cleaning device larger than the internal
diameter of the tubes.
WARNING
This machine requires oil lubrication mixed with the air
supply. When using the machine in a confined space,
the operator must wear proper eye protection and use a
breathing apparatus capable of filtering airborne oil particles.