User MP500/xx
9
-
Open the system management, press the connection selection button and choose the COM port related to the modem
connected at the telephone line on which the system will call followed by “ – Countercall”
-
In the appearing pop-
up select the voice “GSM Countercall” and press “Ok”
-
Press the “Connect” button, Hi-Connect will make a vocal call to the control panel and will wait for a Countercall.
Notes
-
The “Adj.” parameter shown in the Countercall selection pop-up usually should not be modified. In case of troubles with the
GSM Countercall, verify the GSM module installed on the control panel. If the module
is not “Sierra”
marked,
try to set the
parameter at 2. If the module
is
“
Sierra
”
marked,
try to set the parameter at -2. Normally greater values are not required.
-
After having sent the Countercall command to the control panel, Hi-Connect will wait 2 minutes for the call. Do not close the
management window before the time runs out; after the expiry, if the system did not call, an error pop-up will be showed.
