14
User MP500/xx
2.3.2
Control panel data changes from keypad
When changes are made to the control panel data directly from the keypad and not from Hi
–Connect, at the subsequent connection the
menu will display the warning icon
next to all the changed nodes.
To update the data with the changes made select the button
“Load programming from control panel”
.
The uploaded data depends on the selection in the menu:
Node “Programming” selected, all the changes are uploaded from the control panel;
Modified node selected, only the changes in the sub-nodes are uploaded from the control panel;
Modified sub-node selected, only the changes in the sub-node are uploaded from the control panel.
2.3.3
Smart data uploading and downloading
The total uploading and dow
nloading (uploading and downloading with the “Programming” node selected) does not imply the transfer of
the whole programming, but only that of the nodes and sub-nodes actually misaligned between the control panel and the software.
Anyway, it is possible to force the total data uploading and downloading without considering the actual differences.
The forced load is possible also for the single nodes or sub-nodes.
