User MP500/xx
27
5.3
CONFIGURATION MENU
5.3.1
Camera configuration
This section can be used to configure the cameras on the same network as the Web Server (maximum permitted number of cameras = 8).
Select the
“Hi-Connect” checkbox to enable management of each camera.
An enabled camera can be programmed in the Programming/Camera section.
An
X
will appear in the in the Web Server column if the camera is connected and already associated to the Web Server.
Select the camera type in the “Type” list box: OTHERS / ELKRON.
Use the “DHCP Client” list box to indicate whether to enable the camera DHCP Client (IP address assigned by the network router) or
disable it (fixed IP address).
5.3.2
Network parameters
This section can be used to edit the IP Address, Subnetmask and Default Gateway parameters previously set during initialisation of
you Web Server.
