User MP500/xx
11
2.2
FIRST CONNECTION
2.2.1
Start and peripheral alignment
At the first connection the program shows the screen “Peripheral Units” that asks for the alignment of the system configuration with the
software configuration.
Answering “Yes”, the configuration is aligned and it is possible to continue with the programming.
Answering “No”, the connection is interrupted because no operation is possible with a hardware misalignment.
It is also possible the manual selection of the peripherals before the connection (see
§ 3.1.1
). This operation is useful for an offline
configuration.
This check is performed at every connection to the control panel. In case of aligned configuration, the message will not be displayed.
