WARNING: Please carefully read and properly follow the instructions for installation found in this manual.
STEPS:
Weight
here
Weight
here
Insert the weight (1) onto the clip (2) by sliding it down onto the clip (2).
Install the weight clip (2) at the point of the hose marking “weight here”.
2
1111
1111
2
H
C
5
H
C
1
5
2
3
4
Attach the tee connector (5) onto the outlet of the cold water supply valve
(1) and tighten with wrench. Do not overtighten. Thread the nut (2) on
the cold supply line onto the tee connector (5) and tighten with wrench.
Do not overtighten. Thread the nut (3) on the hot supply line onto the
outlet of the hot water supply valve (4) and tighten with wrench. Do not
overtighten.
