Optional Deck Plate Installation:
Before installation, align the hole in the
gasket (1) and deck plate (2) with the
mounting hole in the sink. Place the
faucet assembly through the deck plate
(2) and mounting hole in the sink until
the faucet assembly sets on top of deck
plate (2).
Optional Flange Installation:
Before installation, ensure that the
f
o
m
o
tt
o
b
e
h
t
n
o
d
e
c
a
l
p
s
i
)
1
(
e
g
n
a
lf
the new faucet assembly. Insert the
faucet body through the hole in the
sink.
WARNING: Please carefully read and properly follow the instructions for installation found in this manual.
STEPS:
4
1
1
2
Fig 1
1
1
2
3
3
Push
up
Sink
Push
up
Sink
Sink
Continue to push up
and turn clockwise
to tighten
From underneath the sink, secure the faucet
assembly to the sink with the FastMount™
system (4). Push the FastMount™
system (4) up over the threads until it stops
against the bottom of the sink, then hand turn
(clockwise) to tighten (Fig 1).
1
2
4
4
Blue
Push the quick connector (2) with the blue tab
firmly upward and attach it to the receiving
block (1) with blue. Pull down moderately to
ensure the connection has been made. If it is
necessary to remove the quick connector (2),
squeeze the tabs on the quick connector (2)
and then pull down to disconnect.
4
