Page 5
98550C (Rev. B - 8/10)
LZS8WS*1A, LZSDWS*1A, LZSTL8WS*1A, LZSTLDWS*1A
LZS8WS*2A, LZS8WS*3A, LZSTL8WS*2A, LZSTL8WS*3A
BOTTLE FILLING UNIT
IMPRESO EN LOS E.E.U.U.
IMPRIMÉ AUX É.-U.
FOR PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR CALL 1.800.323.0620
PARA PIEZAS, CONTACTE A SU DISTRIBUIDOR LOCAL O LLAME AL 1.800.323.0620
POUR OBTENIR DES PIÈCES, CONTACTEZ VOTRE DISTRIBUTEUR LOCAL OU COMPOSEZ LE 1.800.323.0620
ELKAY MANUFACTURING COMPANY • 2222 CAMDEN COURT • OAK BROOK, IL 60523 • 630.574.8484
REPAIR SERVICE INFORMATION TOLL FREE NUMBER 1.800.260.6640
NÚMERO GRATIS DE SERVICIO 1.800.260.6640
INFORMATIONS POUR LE SERVICE PAR NUMERO SANS FRAIS 1.800.260.6640
1
2
3
4
5
6
7
Fig. 7
WATER FILTER EXPLODED VIEW
DESCRIPTION
1
2
3
4
5
6
7
ITEM NO.
PART NO.
51294C
70792C
70823C
70822C
51300C
70818C
28641C
Filter Head Assy.
Screw #8-18 x .75 PH
Fitting - Superseal 3/8” (10 mm)
Fitting - Superseal 1/4” (6 mm)
Filter Assy
Elbow - 3/8” (10mm)
Bracket
DESCRIPCIÓN
DESCRIPTION
Ensamblado de la Cabeza del Filtro
Tornillo #8-18 x .75 PH
Accesorio - Supersello 3/8" (10mm)
Accesorio - Supersello 1/4" (6 mm)
Ensamblado del Filtro
Codo - 3/8" (10 mm)
Fijador
Ens. de tête de filtre
Vis #8-18 x .75 hp
Raccord - Superseal 3/8" (10mm)
Raccord - Superseal 1/4" (6mm)
Ens. filtre
Coude - 3/8" (10mm)
Support
WATERSENTRY
®
PLUS
FILTER PARTS LIST
(See Fig. 7)
LISTA DE PIEZAS DEL FILTRO
(Vea Fig. 7)
LISTE DES PIÈCES DU FILTRE
(Voir Fig. 7)
DRAIN MAT EXPLODED VIEW
Fig. 8
Short Screws
Long Screws
Drain Cover
Drain Mat
Nuts
DESCRIPTION
98543C
98544C
98545C
98546C
98547C
98548C
98549C
98551C
98552C
98631C
98632C
Kit - Electrical Package
Kit - IR Sensor
Kit - Solenoid Valve Replacement
Kit - Aerator Replacement
Kit - Top Cover Replacement
Kit - Drain Mat & Cover Replacement
Kit - Hardware & Waterway Parts
Kit - Filter Mounting
Cover
Kit - Retro Filter Alternate Mounting
Kit - Electrical Package 220V
Kit - Solenoid Valve Replacement 220V
REPLACEMENT PART KITS
PART NO.
DRAIN MAT ASSEMBLY AND CARE
1) Insert a nut into each of the four hex pockets on the bottom side of mat.
2) Place Drain Cover on mat and install the four screws as shown in Fig.
8. Note the two shorter screw are used at the back of the cover. It is
recommended that the cover be removed and the drain and drain cover be
cleaned weekly. To dis-assemble or re-assemble the drain cover to the mat
the mat can be picked up from the front to access the nuts beneath.
PRINTED IN U.S.A.
WALL MOUNTING PLATE
Fig. 9
