KOMET 200 - 600
9
Emergency release
9.1
Emergency releasing
Depending on the accessibility remove either the plastic cap on top or the one
at the bottom of the gate opener. Place the wrench into the opening until it
engages into the locking device (hexagon socket).
Drawing 11
1 release
2 engage
When using the top emergency release, turn the wrench approx. ½ turn
anticlockwise. When using the bottom emergency release, turn the wrench
approx. ½ turn clockwise. The gate wing can now be moved freely.
The display in the controller shows
ef
(EF = message from the controller MO
36 that at least one opener is disengaged).
9.2
Engaging of emergency release
Insert the wrench into the emergency release. Turn the wrench approx. ½ turn
clockwise. The overcoming of the dead point must be clearly noticeable (when
engaging the emergency release at the bottom, turn the wrench
anticlockwise). In case the wrench can only be moved slightly out of its original
position, move the gate wing until the teeth of the gear interconnect and the
wrench can be moved approx. ½ turn.
When the emergency release is correctly engaged, the display on the
controller stops showing
ef
.
At the next use of BT the gate wing moves into position OPEN for
synchronizing. At the following use of BT the opener moves in normal mode.
22