4
M968601REV.1.1
5
INSTALL SPRAY HOLDER
Place SPRAY HOLDER
(1)
into separate hole of SINK
(2)
and
assemble NUT
(3)
onto shank from underside of SINK
(2)
or
mounting surface.
Hand tighten MOUNTING NUT
(3)
.
1
2
3
FERRULE
COUPLING NUT
MAKE WATER SUPPLY CONNECTIONS
Connect water supply to FAUCET
(1)
with 1/2" IPS FLEXIBLE SUPPLIES
(2)
or 3/8" O.D. BULL-NOSE RISERS
(3)
.
Use adjustable wrench to tighten connections. Do not over tighten.
Be careful not to kink copper supply when bending. Use tubing cutter
to cut to proper length.
NOTE: FLEXIBLE SUPPLIES OR BULL-NOSE RISERS MUST BE PURCHASED SEPARATELY.
3
INSTALL HANDLES
1
2
5
4
3
TOP
SPLINE END DOWN
Push ADAPTER
(1)
on VALVE STEM
(2)
, so that the hole of the
ADAPTER
(1)
with a spline is facing up.
Fig.
A.
Find correct position of LEVER HANDLE ASSEMBLY
(3)
by adjusting
male teeth on ADAPTER (1) to female teeth in HANDLE
(3)
.
Install LEVER HANDLE ASSEMBLY
(3)
onto Adapter
(1)
.
Insert HANDLE SCREW
(4)
and tighten.
Thread INDEX BUTTON
(5)
into HANDLE ASSEMBLY
(3)
.
Fig.
A.
1
3
2
