6
TEST INSTALLED FAUCET
7
Remove AERATOR
(1)
. With HANDLES
(2)
in OFF position, turn on water supplies
and check all connections for leaks.
Operate both HANDLES
(2)
to flush water lines thoroughly. Rotate SPOUT
(3)
in both directions. Replace AERATOR
(1)
.
M968601REV.1.1
Feed SPRAY HOSE
(1)
through SPRAY HOLDER
(2)
and
attach COUPLING NUT
(3)
of HOSE
(1)
to HOSE ADAPTOR
(4)
on valve body. Tighten COUPLING NUT
(3)
firmly.
CONNECT SPRAY HOSE
2
2
Direct SPRAY HEAD
(4)
into sink and activate SPRAY
(4)
.
Check all hose connections for leaks.
Aerator may accumulate dirt causing distorted and reduced water flow. Remove aerator and rinse clean.
9
8
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A
CLOTH WITH A COARSE SURFACE.
CARE INSTRUCTIONS:
1
3
4
1
3
4
SERVICE
To change direction of handle rotation,
proceed as follows:
Turn valve to OFF position. Unthread INDEX BUTTON
(1)
. Remove
HANDLE SCREW
(2).
Pull HANDLE (3) off VALVE STEM
(4)
.
Remove SPRING CLIP
(5)
. Lift STOP WASHER
(6)
, turn 90˚ and replace.
Replace SPRING CLIP
(5)
.
Find correct position of HANDLE
(3)
by adjusting male teeth on VALVE STEM
(4)
to female teeth in HANDLE
(3)
.
Re-install HANDLE
(3)
, SCREW
(2)
and INDEX BUTTON
(1)
.
If spout drips, operate handles several times from OFF to ON position. Do not force - handles
turn only 90˚ .
1
2
3
4
6
5
90˚