THE CONSTRUCTION OF ELIXAIR E 2100
(figure 2)
A) Active carbon filter (2 units)
(product no 030400)
B) Electronic collector cell (2
units)
(product no 250360)
C) Prefilter (2 units)
(product no 030390)
D) Grid
E) Wireless remote control
F) Service door
G) Transport supports (2 units)
THE LOCATION OF ELIXAIR E 2100 AIR PURIFIER
It is important to note that in addition to using the air purifier, ordinary ventilation is
necessary to bring in oxygen and to remove carbon dioxide, cigarette smoke and gaseous
impurities caused by various activities in the premises and discharged from the furniture and
the structures of the building. Elixair efficiently removes airborne particles and reduces
noxious gases and odours. It does not, however, render respirators or gas masks useless in
such premises where harmful airborne impurities are so abundant that respirator of fresh air
equipment would normally be required or where staying without any breathing protection is
limited.
Warning!
Due to its mode of operation, the electronic collector cell may
occasionally emit sparks. Never use the air purifier in a place where flammable gases
or liquids or large amounts of dust may combine with air to form an explosive
mixture which could be ignited by a spark.
When locating the unit please note the following:
-
Preferably install the unit to the ceiling. Also wall installation is acceptable. In case of
wall installation, part of the air flow from the purifier may immediately return to the unit
which weakens the effect of air cleaning in the premises.
-
When installing your Elixair purifier, make sure to choose such a place where the
normal ventilation is not disturbed and on the other hand, where the functioning of
Elixair will not be disturbed. Thus avoid installing the air purifier next to fresh-air vents
or exhaust vents.
-
Installation inside a suspended ceiling so that just the grid is in sight is allowed only if
the return flow of air from the purifier has free access back into the room. Also take