2
Locate Part #11 and Part #12. Slide the vertical fins into the
pre-cut slots on the wing. Apply hot melt glue to secure the
vertical fins. The vertical fins should be installed at roughly
60-degree angle to the wing with
the inner frame.
Locate Part #16 and Part #17. Install the carbon fiber rods
in the pre-cut slots on the wing. Apply hot melt glue to
secure the rods on the wing.
Locate Part #3. Slide the rear fuselage part into the pre-cut
slots on the wing. Apply hot melt glue to secure it.
Locate Part #7 and Part #8. Apply hot melt glue to secure
them on the wing.
.
