CONTROL PANEL
The controls are located on the front of the base (1). Turn dial to P, 1 or 2 in order to select a
function (see directions under "How to Use").
OFF CONTROL
Processor should be stored in OFF position (0) and unplugged when not in use.
PULSE CONTROL
Use PULSE (P) for short processing tasks. This lets you control the size and uniformity of foods being
chopped.
The dial must be turned to the P position and held for the appliance to operate in PULSE
mode. When released, the dial will return to the 0 position and the function will end.
The motor of the processor will run as long as the PULSE position is held. Hold the dial in the
PULSE position and then release to allow the blade to stop running and the food to fall to the
bottom of the workbowl.
Pulsing gives better control when chopping, mincing, mixing and blending foods. You can
control the size of the foods, from coarse to fine.
SPEED 1 and 2 CONTROL
This food processor has two speeds. Turn the dial to the appropriate speed when the food is ready
to be processed. When turned to one of these speeds, the processor will continue to run until the
dial is returned to the OFF (0) position.
BEFORE
FIRST USE
Remove all packing material and any stickers from the product.
Important: Handle chopping blade and slicing and shredding disc carefully. They are very sharp.
Wash all removable parts as instructed in CARE AND CLEANING section of this manual.
Select a level, dry countertop where the appliance is to be used, allowing air space on all sides
to provide proper ventilation for the motor.
www.maxi-matic.com
5
