HOW TO USE YOUR
FOOD PROCESSOR
ASSEMBLING THE PROCESSOR
HOW TO INSERT AND REMOVE THE CENTER POST
The center post (2) is removable. When you are ready to use the food processor, place the center
post into the smaller opening in the main base (1).
HOW TO LOCK THE WORKBOWL INTO POSITION
1.
Attach center post to workbowl (3). Place the workbowl on the base with handle turned to the
right of the locking mechanism (7) over the unlock symbol.
2.
Hold handle and rotate workbowl counter-clockwise toward the until it clicks firmly into place.
NOTE: Be sure to lock the workbowl in place before attaching the chopping blade or any other
attachment and the cover.
NOTE: Always fit the bowl and attachment onto the machine before adding ingredients.
3.
Fit the Cover (4) ensuring the top of the center post locates into the center of the lid.
NOTE: Do not use the cover to operate the processor; always use the on/off control.
4.
Switch on and select a speed.
NOTE: The processor won't work if the bowl and lid are fitted incorrectly.
NOTE: Use pulse (P) for short bursts. Pulse will operate for as long as the control is held in
position.
5.
Reverse the above procedure to remove the cover, attachments and bowl.
NOTE: Always switch off before removing the cover.
IMPORTANT: Your processor is not suitable for crushing or grinding coffee beans, or
converting granulated sugar to caster sugar. When adding almond essence or flavoring to
mixtures avoid contact with the plastic as this may result in permanent marking.
HOW TO USE THE CHOPPING BLADE IN THE WORKBOWL
The chopping blade (10) is used to coarsely or finely chop, mince, mix, and puree foods to a
smooth consistency.
1.
Lock workbowl into position.
2.
Hold chopping blade by center shaft and insert onto center post.
CAUTION: The chopping blade is very sharp. Use caution when handling and storing.
3.
Place food in workbowl.
4.
Place cover on workbowl and lock into place by rotating counterclockwise.
5.
Place the food pusher (6) in place.
IMPORTANT: Never use your fingers to direct food through the feed chute (5).
6.
Select your desired speed (PULSE, 1 or 2).
NOTE: Process foods for no more than a few seconds at a time. Pulsing produces excellent
results and offers greater control.
IMPORTANT: Make sure the chopping blade has completely stopped spinning before
removing cover from processing bowl.
Return the dial to the OFF (0) position and allow the chopping blade to stop revolving before
removing cover. Twist cover toward (clockwise) to remove.
IMPORTANT: Unlock lid first before removing workbowl.
7.
Unlock workbowl by turning it counterclockwise and lift off base.
www.maxi-matic.com
6
