IMPORTANT
SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the
following:
1.
Read all instructions.
2.
To protect against risk of electrical shock do not immerse cord, plugs or appliance in water or
other liquid.
3.
Close supervision is necessary when any appliance is used by or near children.
4.
Unplug from outlet when not in use, before putting on or taking off parts and before cleaning.
5.
Avoid contacting moving parts.
6.
Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or is dropped damaged in any manner. Return appliance to the nearest
authorized service facility for examination, repair or electrical or mechanical adjustment. Or,
call the appropriate toll-free number listed on this sheet.
7.
The use of attachments, including canning jars, not recommended by the manufacturer may
cause fire, electric shock or injury.
8.
Do not use outdoors.
9.
Do not let cord hang over edge of table or counter.
10.
Keep hands and utensils away from moving blades or discs while processing food to reduce
the risk of severe injury to persons or damage to the food processor. A scraper may be used,
but must be used only when the food processor is not running.
11.
Blade is sharp. Handle carefully.
12.
To reduce the risk of injury, never place cutting blade or discs on base without first putting
bowl properly in place.
13.
Be certain cover is securely locked in place before operating appliance.
14.
Never feed food by hand. Always use food pusher.
15.
Do not attempt to defeat the cover interlock mechanism.
16.
Do not lift or carry the processor by the handle - or the handle may break resulting in injury.
17.
Always remove the knife blade before pouring contents from the bowl.
18.
Keep hands and utensils out of the processor bowl while connected to the power supply.
19.
Switch off and unplug:
a.
Before fitting or removing parts.
b.
After use.
c.
Before cleaning.
20.
Before removing the lid from the bowl from the power unit:
a.
Switch off.
b.
Wait until the attachment/blades have completely stopped.
21.
Do not use the lid to operate the processor, always use the on/off speed control.
22.
This machine will be damaged and may cause injury if the interlock mechanism is subjected to
excessive force.
23.
Never use an unauthorized attachment.
24.
Never leave the machine on unattended.
25.
Never let the power unit, cord or plug get wet.
26.
Do not exceed the maximum capacities stated.
www.maxi-matic.com
1
