Elite FLUID UNIT, Инструкция по эксплуатации

Страница: 8 / 18

8
EN
Congratulations on your purchase of an Elite
hometrainer
IMPORTANT
Do not stop the rotation of the bicycle wheel by using
caliper or disk brake. This seriously damages the
roller and the tire.
The resistance unit may warm-up while in use. Let
it cool down before handling it and touching the
flywheel.
There are no user serviceable parts.
The warranty is void if opened or tampered for any
reason
01_GENERAL SAFETY WARNINGS
Before using your trainer, carefully read
the warnings listed below for your health
and safety.
1. The appliance is not to be used by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction.
2. Children being supervised not to play
with the appliance.
3. Before beginning a training programme,
undergo a physical examination certifying
good health.
4. Choose a training level compatible with
your physical endurance and the status of
your health.
5. If you feel particularly fatigued or sore
while exercising, stop using the trainer
immediately and consult your doctor.
The above warnings are general and not
exhaustive of all the precautions that
should be taken for the proper and safe
use of the trainer; which is solely the
responsibility of the user.
02_PRODUCT MODIFICATIONS
Also in view of any technical update, ELITE reserves
the right to make changes to the products or their
specifications without being obliged to notify or inform the
Customer beforehand for:
a) changes that do not affect negatively the product
performance;
b) changes required to meet or improve the product
specifications;
c) changes necessary for the products to comply with the
applicable legal requirements.
ELITE also reserves the right to supply these products with
these improvements without being obliged to or responsible
for applying the same modifications to any previously
purchased products, reserving also the right to change
prices and model availability according to market
conditions, component availability and other corporate
considerations.
03_INTRODUCTION
Check the presence of all the following components:
N°1 resistance unit
(Rif. A)
N°1 parts bag:
1 Allen wrench
2 M6 bolts
(Rif. B)
2 washers (Rif. C)
04_FITTING THE POWER FLUID UNIT
- 45 mm diameter roller resistance unit.
- To mount the unit to the frame, follow the instructions in
the frame’s manual.
- The unit is now ready for training. In order to set different
resistance levels use your bike’s gear shifters, just like on
the road.