RUBBER SEAL RING ASSEMBLY
Always ensure the Rubber Seal Ring
(18) is securely fitted onto the metal
ring in the interior of the Lid (2). The
Rubber Seal Ring (18) should fit
around the outside of the entire
metal ring. Make sure the crease in
the Rubber Seal Ring (18) meets with
the metal ring all the way around.
Then place the metal ring and
Rubber Seal Ring (18) back into the
Lid (2) making sure the hole in the
center of the metal ring's cross-
section is lined up with the metal pin
in the center of the Lid (2). Press
down firmly until the metal ring is
secured onto the Lid (2). (Figures 2A
– 2B)
2A
2B
www.maxi-matic.com
9
Содержание EPC-813 Series
Страница 1: ......