HOW TO CLEAN YOUR PRESSURE COOKER
1.
Always make sure the Pressure Cooker is unplugged, depressurized and completely
cooled down before dismantling.
2.
Use a non-abrasive sponge or damp wash cloth to clean the exterior of the outer
body (13) and the exterior surface of the pressure cooker. NEVER immerse the
pressure cooker in any liquids.
3.
Remove the Condensation Cup (12) and rinse it thoroughly and let dry. Clean the
Upper Ring (9) with a damp sponge or wash cloth.
4.
Clean the Lid (2) with warm soapy water, including the Rubber Seal Ring (18),
Pressure Limiting Valve (3), Filter (17), Vent, Float Valve (5) and let dry thoroughly.
The Pressure Limiting Valve (3) pops off easily by gently reaching underneath it and
gently prying upwards. Be careful not to damage the thin wire spring under it.
On the underside of the lid below the Pressure Limiting Valve (3), is a small metal
filter cap which can be easily removed to clean.
5.
Let parts dry completely before reassembling.
6.
Wash the Inner Pot (6) and Glass Lid (21) with a non-abrasive sponge and allow to
air dry or use a towel. It is not recommended to use any type of scouring pad that
can scratch the non-stick surface of the Inner Pot (6).
7.
Clean the Pressure Limiting Valve (3) and the holes with a small brush to ensure
smooth flow of steam during the release cycle.
8.
Store the inner pot inside of the Pressure Cooker. Store Pressure Cooker in a cool,
dry location.
NOTE: Any servicing required shall be performed by an authorized service
representative or from the original manufacturer or distributer.
How to Clean the Filter:
If you wish to clean the filter (10), you may remove it
by pulling vertically. To re-attach, simply line up the
filter (10) and press down to secure the filter (Figure
23).
23
www.maxi-matic.com
23
Содержание EPC-813 Series
Страница 1: ......