63
Boiler Manual
PART 11: START-UP PROCEDURES FOR THE INSTALLER
(CONTINUED)
Press the
key once
FAULT HISTORY
7
0
08 28 2009
5:19A
This screen displays the seventh oldest lockout
fault that occured in the boiler controller. The
top line will alternate between the words ‘FAULT
HISTORY’ and the actual fault encountered if
one has occurred and the bottom line will dis-
play the date and time that the fault occurred.
Press the
key once
FAULT HISTORY
8
0
08 28 2009
5:19A
This screen displays the eighth oldest lockout
fault that occured in the boiler controller. The
top line will alternate between the words ‘FAULT
HISTORY’ and the actual fault encountered if
one has occurred and the bottom line will dis-
play the date and time that the fault occurred.
Press the
key once
FAULT HISTORY
9
0
08 28 2009
5:19A
This screen displays the ninth oldest lockout
fault that occured in the boiler controller. The
top line will alternate between the words ‘FAULT
HISTORY’ and the actual fault encountered if
one has occurred and the bottom line will dis-
play the date and time that the fault occurred.
Press the
key once
FAULT HISTORY
10
08 28 2009
10:01A
This screen displays the tenth oldest lockout
fault that occured in the boiler controller. The
top line will alternate between the words ‘FAULT
HISTORY’ and the actual fault encountered if
one has occurred and the bottom line will dis-
play the date and time that the fault occurred.
B. ELITE HEATING BOILER TEST MODE
This Function is intended to simplify the gas
adjustment if needed. Listed in Figure 11-3 are the
recommended combustion settings for the gas
type selected to run the Elite Heating Boilers.
Automatic modulation does not take place when
the controller is in Test Mode. The boilers will mod-
ulate down if the program set point is reached
while running in Test Mode. It is recommended
you open as many heating zones as possible to
create a heat demand so the test mode operation
will not be interrupted. To exit the Test Mode, Press
the ‘Up’ and ‘Down’ arrow keys simultaneously.
NOTE: The boiler will automatically exit the Test
Mode after 20 minutes of operation.
C. CASCADE MENU
This menu is accessed by pressing the
key
from the default menu or the
key from the sta-
tus menu.
CASCADE MASTER READY
SYS PUMP OFF
This screen is an informative screen to tell the
user that the boiler is configured as a cascade
master boiler and that the cascade system is
ready to accept a demand for heat. The second
line indicates the status of the system pump out-
put of the cascade system. This screen will alter-
nate with the default screen every 5 seconds or
it can be accessed by pressing the
key from
the default screen.
CASCADE NO FOLLOWER
SYS PUMP OFF
Description: This screen will be displayed when
the boiler is configured as a master boiler and
there are no follower boilers connected to the
master or if none of the follower boilers are pow-
ered up. The second line indicates the status of
the system pump output of the cascade system.
This screen will alternate with the default screen
every 5 seconds or it can be accessed by pressing
the
key from the default screen.
CASCADE NO SENSOR
SYS PUMP OFF
Description: This screen will be displayed when
the boiler is configured as a master boiler and
there is no system temperature sensor connected
Содержание EL-110 LP
