Elite 5701N, Руководство пользователя

Страница: 21 / 43

M4_machine repair point
When to use: This position is set at a position that is easier to repair X.Y coordinate position
M6_Conveyor belt standby point:Z>2000um stay here for vision alarm
When to use: After finish every piece, wait at this coordinate for next piece, set it at plastic cup to prevent
dropping while waiting
M14 delay point setting, delay time1000ms will wait at this point
When to use: Working point is written into delay point or move to this coordinate, delay point is used
when glue output is slow and needs waiting or pre-heating time waiting
1.
Select M4_machine repair point, X.Y axis move to ideal repair position as below Pic. 1
2.
Select M6_conveyor belt standby point:Z>2000um stay here for vision alarm, move X.Y axis as
below Pic. 2
3.
Select M14 delay point setting, Delay time 1000ms will wait at this point. Move X.Y axis as below
Pic. 2
4.
Revise
5.
Red disk will show up, click mouse left key to save system file.
5
4