Elite Suite ELT-KLCD, Руководство по установке

Страница: 16 / 36

13 ELT-KLCD EliteSuite Installation Manual
LOCAL INSTALLER LOGIN
Introduction
The default local installer code is [0000]. To access the local
installation menu press the [ENTER] key followed by [0000], a
menu that can be scrolled using the [
Ï
] and [
Ð
] keys will be shown.
Pressing [ENTER] or the menu number will select the menu item.
If a module update has been performed on the system controller and
the user code at system controller user location 3 (UN00003) has
been changed. The code that is entered in this setting is now the
local installer code. This code is programmed system wide when an
update is performed.
To disable the Installer Code on ALL EliteSuite keypads
(Recommended) delete the code for User UN00003 by following the
instructions in the EliteSuite System Reference Manual for deleting a
user pin code.
You can not access the installer menu if the EliteSuite system
is armed. Disarm the EliteSuite system before attempting to
login with the installer code.
It is recommended that all installer modifications are
completed and downloaded using the Protege System
Management Suite (PRT-SMGT). Ensure a module update
command is executed when modifications are being made.