Elite Suite ELT-KLCD, Руководство по установке

Страница: 13 / 36

10 ELT-KLCD EliteSuite Installation Manual
DEVICE CONFIGURATION
Introduction
Before the EliteSuite LCD Keypad module will communicate it must
be assigned an address and programmed with specific options as to
how it will operate. This is achieved by accessing the device
configuration menu.
To gain access to the device configuration menu, apply power to the
device, when the screen displays the device model and version
information, press the [CLEAR] key. A prompt will be presented
asking you to press the [ENTER] key to setup the keypad. Pressing
[ENTER] will be display a menu for the address configuration,
contrast, version information and device defaulting.
The device configuration menu can only be accessed when the
device powers up. It is not able to be accessed when the
system is operational.
Address Selection (Device Config Menu 1)
The address selection sets the address of the EliteSuite LCD Keypad,
this address must be a unique address on the system from 1 to 250.
Use the numerical keys from 0 to 9 to program the address and
press [ENTER] to save the setting. To exit without making changes
press the [MENU] key.
Device Options (Device Config Menu 2)
The address selection sets the address of the EliteSuite LCD Keypad,
this address must be a unique address on the system from 1 to 250.
The device options set options that relate to the mode of operation of
the EliteSuite keypad. To toggle options press the keys [1] to [8] ,
Device Options
[--------]
Enter device
address: 256