071518-‐JA_Ver2
www.elitescreens.com
2
Pre-Installation
1.
Carefully unpack the screen.
2.
Always handle the screen in a leveled position on a clean surface.
3.
In order to protect the screen from exposure to stains, keep the screen out of contact with foreign
particles such as dust, sawdust, and/or liquids.
Installation Warning
The instructions provided in this user’s guide are for reference only. Please consult a professional
installation company for further installation and safety advice. The installer must insure that proper
mounting hardware is used to provide adequate strength suitable for the installation. Elite Screens is not
liable for any faulty installations.
Individual modifications to this product are prohibited and will void the warranty with the manufacturer.
Please contact Elite Screens Customer Service for any questions.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that the interference will not occur on a particular installation. If this
equipment causes harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures.
ü
Reorient or relocate the receiving antenna of the device which may be casing the interference.
ü
Increase the separation between the screen and the device’s receiver.
ü
Connect the equipment into a different power outlet other than the device.
Note
Regardless of the mounting method, the screen should be securely supported so that the vibration or
pulling on the viewing surface will not cause the casing to become loose or fall. The installer must insure that
the fasteners used are of adequate strength and suitable for the installation location.
Hardware Parts List for the Starling Series
Please make sure all parts listed below are included before proceeding with the installation.
A. Pair of Bracket
s
x1
B. Steel Expansion Concrete
Anchor Hook x 2
C. Spring SnapLink x 2
D.
Steel Expansion
Concrete Anchor x 4
E. ST5x40 Self-‐drilling screws x 4
F. Plastic expansion dry-‐wall
anchor x 4
G. M6x16 screw x 4
H. M6 nut
(Left)
(Right)
