JA10302020
U-00197
7
Connect edge trim frames (
e/f
) together using the
M4
center joint (e)
and secure with four of the
M4x4 screws (m)
as show in
Step 1
. Repeat for other side.
Once both top and bottom edge trim frames have been connected, attach the vertical (left/right) sides edge trim
frames (
d
) using the
elbow joints
(
f
) and secure with four
M4x4 screws
(
m
) on all corners,
Step 2
.
Step 12
: Install the
angle cover
(
n
) on each corner of the frame using the
M4x4 screws (m)
.
Note: The angle cover screws holes align with the screw holes on the elbow joint.
Step 13
: Install the
springs (q)
in each middle area to further support the bezel trim edge frame.
e.
m
.
1
1
2
2
2
2
f.
m
n.
Tear off the double-sided tape.
q.
