JA10302020
U-00197
4
c
c
c
c
c
c
c
c
c
c
Step 5
: Secure the elbow joints by fastening them with
M4x7 screws (
g)
, 4 at each corner.
Screen Material
Step 6:
Put on the
white gloves (p)
and carefully unroll the screen material on a clean surface from the roller to the
other side as shown below. The back side of the screen material should be placed upwards.
Step 7:
Insert the
rods (r)
through the sleeves according to their corresponding lengths on each edge of the screen
as shown below. The short rods (top/bottom) will overlap to secure a firm grasp in the middle areas.
Step 8:
Carefully and gently place the assembled frame on top of the screen material in the marked areas as shown
below. Make sure to not allow the angle edge of the frame to come in direct contact with the screen material to
avoid puncturing it.
2. Hardware Parts List
a.
b.
c.
d.
e.
f.
g.
h.
i
j.
k.
l.
m.
Back side
*Make sure the frame corners are positioned
in the marked areas of the material.
Front
Back Side
g.
Back Side
c
r.
(Red tips)
c
Back Side
r.
(Black tips)
Back
Side
Back
Side
c
c
c
c
c
c
c
c
c
c
