User manual
AR2
(Screw adjustment type)
Rev. V210929DT
Elite Screens China Corp.
8
Adjustment bar installation
※
The adjustment bar is installed into the groove along the fiberglass rod
Center support bar installation
Push the Center support bar (M) in the middle of the frame and align each end of the support bar
with the top and bottom frames.
6.
Carefully and gently place the assembled frame on top of the screen material. In order to avoid
puncturing the material, do not allow the angled edge of the frame to come in direct contact with
the screen.
7.
Ensure that the sliders in the left and right short frames (two sliders on each side) are fixed 1/4
away from both ends.
Screen material
(O)
Adjustment bar
(Q)
※
Align the frame with the line
Note: The screen back facing up
※
Make sure the sliders in the grooves are
positioned 1/4 at both frames
Horizontal frame
(B)
Center support bar (M)
push
Center support bar
（
M
）
