User manual
AR2
(Screw adjustment type)
Rev. V210929DT
Elite Screens China Corp.
15
3)
Use a level to check whether the distance between points A, B, C, and D, and check AC BD
are horizontal, and whether AC, BD is vertical.
4)
Confirm that there is no problem at four points, next step is wall installation.
3. Fixed installation:
Please reconfirm that the four points have been successfully located.
1)
Drill holes at four points, A, B, C and D.
2)
And install anchors at four-point hole.
3)
Fasten the screw on the anchors and keep the screw 1cm away from the wall.
4)
Two people lift the screen, first clamp the two lower wall brackets on the screws at point C and D,
and then slide the screen up to clamp the two upper wall brackets on the screws at point A and B.
5)
After sliding the screen left or right to the state that it cannot slide, try to make the screen move
forward to confirm whether the four wall brackets on the screen are stable and stuck to the four-
hole screws.
(END)
