User manual
AR2
(Screw adjustment type)
Rev. V210929DT
Elite Screens China Corp.
7
4.
Insert the Fiberglass rods (L) through the openings. The shorter rods (1, 2) are used on the vertical
edges of the screen material, and the longer rods (3, 4) are used on the horizontal edges, as
shown below.
5.
Insert two long Adjustment bars (Q) (1, 2) on the fiberglass rod of the short side of the screen
material and two short Adjustment bars (Q) (3, 4, 5, 6) on the fiberglass rod of the long side of
the screen.
Installation direction of Adjustment bars (Q):
Fiberglass rod (L)
3
1
4
2
Long side of the frame
Short side of
the frame
1
2
4
3
5
6
※
Please noticed that four Angle
adjusting rods have bevel angles
※
The upper and lower middle adjusting
rods are right-angled edges
Short side of
the frame
Long side of the frame
