8
ASSEMBLY INSTRUCTIONS
STEP 2
—
Before starting assembly, pull out the Quick Release Knob (#24), remove and dispose the
Protection Insert.
—
Connect the Middle computer wire 1 (#31) from Main Frame (#1) to the Middle computer wire
(#32) from the Sliding Frame (#23).
—
Insert the Sliding Frame (#23) into the Main Frame (#1). Thread the Quick Release Knob
(#24) through selected hole on Main Frame into Sliding Frame to lock it in position. Thread a
Leverage Knob (#20) into the Sliding Frame from bottom. The Leverage Knob needs to touch
the floor.
—
Attach the Rear Stabilizer (#27) to Sliding Frame (#23). Secure them together with two M8 x 2
3/8” Carriage Bolts (#13), two Ø 5/8” Curved Washers (#9), and two M8 Domed Nut (#19).