Elite Fitness PEGASUS NS-1003R, Инструкция по сборке

Страница: 11 / 23

11 ELITE EXERCYCLE ASSEMBLY MANUAL
ASSEMBLY INSTRUCTIONS
STEP 5
Note: Extra help may be needed to hold the Front Post (#4) while connecting the computer wires,
sensor wires, and tension cables.
— Attach the Front Post (#4) to the Main Frame (#1). Connect the Middle computer wire 1 (#31)
from Main Frame to the Upper computer wire (#30) from the bottom of Front Post.
— Connect the Lower sensor wire (#12) from Main Frame to the Upper sensor wire (#10) from
the Front Post.
— Pull the tension connector from the Tension Control Knob w/cable (#7) and slide in between
the opening on the connector holder on the Lower Tension Cable (#11) from Main Frame. Pull
the Upper Tension Cable Upward and slide the wire through the slot on the bracket.
— Drop down the Tension Control Knob w/cable so the fitting sits firmly on top of the bracket.
— Secure the Front Post to Main Frame with four Allen Bolts (#8) and four Curved
— Washers (#9).
— Connect the Upper sensor wire (#10) from Front Post to the Sensor Wire from the
— Computer (#2). Connect the Upper computer wire (#30) from Front Post to Computer
— Wire from Computer. Attach the Computer (#2) to the Front Post (#4). Secure it with
— two Philips Screws (#3) which are pre-assembled on Computer.