13
16. PROTECTIVE PIREX DOME
For use with standard halogen lamp GX 6.35 socket.
Transparent, matt or yellow (400
°
K colour correction), can be fitted to all lampheads,
except
R
heads (rectangular heads) for which clear or matt security filters are available.
17. LAMPHEAD TYPES
1. With standard flash duration :
Types S and R (Digital S - Digital SE - Digital SEE - Digital RE)
2. With action stopping (short flash duration) :
Type A
(X 6000N and
Twin X4 with one power pack)
For fashion photography, sport applications and just as useful in the studio for
photographing fast moving subjects.
NOTE : Due to their relatively high power and short duration, it is probable that the flash tube may be
shorter than our standard lampheads.
The
X-heads
(X6000N -
Twin X4
- X8000) has two special flash tubes that focus and maximise the light
ouput.
FOR YOUR SAFETY, USE ONLY ELINCHROM LAMPHEADS ON YOUR GENERATORS
The security filters for the Digital RE - R 3000 - Mini R, can be put on the lateral accessory holders,
matt (code 26254).
Easy attachment of the protective dome:
- Disconnect the lamphead from the pack
- Loosen the 3 screws of the lamphead reflector
- Fit the clips underneath the screw heads and tighten the screws
- Put the dome in place and hook the springs into the airvent holes.
security filters
b) with both cables in the same power pack, it gives short flash duration.
a) with each cable in a separate power pack, it gives standard flash duration.
They can be used for standard or action :
